Usrobotics V.34 Uživatelský manuál stáhnout pdf (Strana 192)

COURIER HIGH SPEED MODEMS

G-10 Additional Operations

6. Locate the voice/data switch at the front of the modem.

Lift up and remove the modem (printed circuit board),

carefully easing the voice/data switch out of its opening in

the front panel.

7. Turn the modem rightside up and locate jumper switches J4

and J6, near the power-adapter socket. Use Figure G-1 as a

guide.

Figure G-1Courier Modem Board

8. The jumpers are black shunts that cover two out of three

upright metal contacts. As shown in the figure, set the

jumpers so they cover the two contacts on each switch that

are closest to the front panel. The third contact on each

switch is exposed.

9. Replace the modem in the case top: ease the voice/data

switch into the opening in the front panel and make sure the

back of the board rests on the locator pins at the rear (from

which you removed the screws).

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 244 245

Žádné komentáře

Usrobotics V.34 Uživatelský manuál Strana 192